The dot map displays grid projects across Switzerland, with three projects shown. Upon entering the site, the first project, «Grid project Airolo – Lavorgo», is preselected and highlighted in grey. A brief description of the project is provided. This description is the same as the one in the project page’s metadata. The map shows one red dot at position 122, with an image placed directly above it at the same position — please check the configuration. The image shows a thumbnail representing the project's location. When you click the red arrow in the project description, the project page will open in the same tab.

The second project is «Bickigen – Chippis», and seven dots are displayed (locations in the config: 42, 57, 74, 95, 116, 138, 156). The image is shown to the left of the dot path at location 74. The link in the description will open the project page in a new tab. The project title and description are overwritten in the configuration and display different information than the project page.

The third project, «Mettlen – Ulrichen», shows three dots (locations in the config: 119, 140, 158). The image is shown above the first dot at location 119. The project title is overwritten in the configuration, while the description matches the one from the project page. The link opens the project page in the same tab.

When you click the «All grid projects» button, an overview of all projects opens in the same tab.

To-do:

• Check if here are three grid projects displayed next to the map
• The first project should be «Grid project Airolo – Lavorgo» and it should be preselected and highlighted in grey when the site loads.
• The second project should be named «Bickingen – Chippis» and the third project should be named «Mettlen – Ulrichen»

Airolo – Lavorgo

• Confirm that this project is preselected and highlighted in grey when the site loads.
• Check that a brief project description is shown.
• Make sure the description matches the metadata of the project page.
• Verify that one red dot appears at position 122 (see configuration of the map).
• Confirm that an image is placed directly above the red dot at the same position.
• Review the configuration for correct positioning of the dot and image.
• Ensure the image displays a thumbnail representing the project’s location.
• Test that clicking the red arrow in the description opens the project page in the same tab.

Bickigen – Chippis

• Confirm that seven dots are displayed at the following positions: 42, 57, 74, 95, 116, 138, 156.
• Check that the image is shown to the left of the dot path at position 74.
• Test that the link in the description opens the project page in a new tab.
• Verify that the project title and description are overwritten in the configuration.
• Confirm that the overwritten title and description differs from the actual project page meta data.

Mettlen – Ulrichen

• Confirm that three dots are displayed at the following positions: 119, 140, 158.
• Check that the image is shown above the first dot at position 119.
• Verify that the project title is overwritten in the configuration.
• Ensure the description matches the one from the project page.
• Test that the link opens the project page in the same tab.

Button: «All grid projects»

• Test that clicking the «All grid projects» button opens an overview of all projects in the same tab.